Aruba Instant On 1930 Series User Manual

For JL681A, JL682A, JL683A, JL684A, JL685A, and JL686A switches, connect the power cord supplied
with the switch to the power connector on the back of the switch, and then into a properly grounded
electrical outlet.
NOTE: The 1930 switches do not have a power switch. They are powered on when the power
cord is connected to the switch and to a power source. For safety, locate the switch
installation near the power outlet.
The switches automatically adjust to any voltage between 100-127 or 200-240 volts and
either 50 or 60 Hz. There are no voltage range settings required.
2. Use the included cable tie to secure the power cord to the switch.
32 Aruba Instant On 1930 Installation and Getting Started
Guide

Aruba Instant On 1930 Series Specifications

General

Model	Aruba Instant On 1930 Series
Switching Capacity	Up to 176 Gbps
Layer	Layer 2+
MAC Address Table Size	16K entries
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Ports	8, 24, or 48 10/100/1000BASE-T ports
Uplink Ports	2 or 4 SFP/SFP+ ports
PoE Options	PoE and non-PoE models available
Management	Cloud-managed with Aruba Instant On mobile app or web portal
Mounting	Rack-mountable
Jumbo Frame Support	9216 bytes
Layer 2 Features	VLANs
Security Features	Access Control Lists (ACLs)
Power Supply	Internal power supply
Humidity	15% to 95% non-condensing
Certifications	CE