ASA Electronics XRV10 - Page 28

28
XRV10
General
1. Some devices (smartphones) may not be compatible with HDMI/MHL connectivity.
2. Incoming calls or messages may pause media output. Media will resume after the call or message.
3. Simultaneouslyrunningmultipleappsonyoursmartphonewhilescreensharingplacesheavy
demand on the smartphone, potentially affecting its performance. Close unused apps on your
smartphone to enhance the screen sharing feature of the unit.
4. If you are having trouble seeing your smartphone display on the head unit TFT, try connecting your
smartphone(WithHDMI/MHLadapter)toanotherdevicesuchasaatpanelTVwithHDMIinput.
IfyoucannotseethesmartphonedisplayontheatpanelTV,thesmartphonedoesnotsupport
HDMI/MHL.
Connecting Your Smartphone to the unit
1. Jensen HDMI/MHL Connect App Installation Procedure
 DownloadandinstalltheJensenHDMI/MHLConnectappfromGooglePlayontoyoursmartphone.
2. Smartphone / Head Unit BT Connection
In order to have full touch screen control from the head unit TFT (via the HDMI/ MHL Connect app),
a BT connection is required between your smartphone and head unit. Refer to the head unit /
smartphone documentation for further information on pairing / connecting devices.
3. Connect Your Smartphone
Most Android smartphones will require an HDMI/MHL adapter in addition to an HDMI cable with
2 Type A male connectors. These adapters are available at smartphone retail stores. See head unit
documentation for more information about HDMI/MHL adapters. Connect your smartphone to
the HDMI/MHL adapter. Connect one end of the HDMI cable to the HDMI/MHL adapter. Connect
the remaining end of the HDMI cable to the multimedia head unit HDMI input (Rear chassis panel).
Consult your smartphone documentation for instructions on how to access HDMI/MHL on your
device.
4. Touch Screen Calibration Start
Launch the HDMI/MHL Connect app on your smartphone. Using the head unit touch screen, go to
Settings in the HDMI/MHL Connect app. Scroll down slightly, and press the Touch Screen Calibration
“Start” button.
5. Touch Screen Calibration
Once the touch screen is calibrated, scroll up, and press System Settings to return to the main HDMI/
MHL Connect page. Press Mobile Home Page to access your smartphone from the touch screen of
the multimedia head unit. Touch the Car Home Page to return to the Main Source Menu of the head
unit. This calibration is performed once per phone when initially set-up.