ASA Electronics XRV10 - Seek Tuning; Direct Tuning

24
XRV10
Scan Icon - Touch to scan all channels starting at channel 1. The tuner will pause for approximately  e
seconds at that channel. Touch scan again to listen to that channel. If scan is not touched, the tuner will
automatically seek the next channel.
Lock Icon - Touch to display the SXM Lock Screen.
CHG PWD Icon - Touch to go to the change password screen.
EQ Icon-TouchtoaccesstheEqualizerlevelsettingsmenu.
Switching to SiriusXM
®
Radio
• Touchthetopleftcornerofthescreen(theSourcebox)toviewtheMainMenuscreen.Fromthe
Main menu screen, touch the SXM icon.
• Pressthe[ ] button on the front panel to switch to the SXM source.
Selecting the SiriusXM
®
Band
Touch the Band icon on the SXM Menu screen to change between the following bands: SXM1, SXM2,
andSXM3.
Seek Tuning
• Tofastseekthenexthigherchannel,touchandholdtheicon .
• Tofastseekthenextlowerchannel,touchandholdtheicon .
Direct Tuning
To enter a SiriusXM® radio channel directly:
1. On the SiriusXM® menu page 1, touch the Direct Entry icon to display the Direct Entry Menu.
2. Enter the desired SiriusXM® radio channel using the on-screen number pad then touch the Ok icon.
If you wish to delete an entry number touch the X icon.
3. Toexitthescreenwithoutchangingthechannel,touchtheBack icon.
Using Preset Channels
A preset is a channel name that is stored for instant access to that channel. Ten numbered preset
buttons store and recall channels for each band.
Storing a Channel
1. Select a band (if needed), then select a channel.
2. On the SiriusXM® menu page 2, touch the Mem icon to access the Preset Channel Screen.
3. Touchthepresetnumber(P1throughP10)inwhichyouwouldliketostorethecurrentchannel(or
touch the Back icon to cancel and close the menu).
The channel will be stored and displayed in that preset. Touch the or icon to scroll up or down the
list.
4. Touch the Back icon to return to the SXM Menu screen.
Recalling a Channel
1. Touch the List icon.
2. Touch the Preset icon to access the Recall Preset Channel Screen.
3. Touchonachannelonthepresetchannellisttoselectthecorrespondingstoredchannel.Touchthe
or icon to scroll up or down the list.