Ascon tecnologic X5 Series - COMMANDS; Keypad Commands

54
6 - Commands
COMMANDS TO THE CONTROLLER AND OPERATING PHASES
6 COMANDS
The commands can be
entered in 3 ways:
6.1 KEYPAD
see page 55
• Setpoint modification
• Manual mode
• Local/remote selection
• Stored Setpoint display
• Tune Run / Stop
• Program start/stop
(see page 66)
6.2 DIGITAL INPUTS
see page 58
6.3 SERIAL
COMMUNICATIONS
see the manual on this topic
x5-uk-ed5 17-09-2009 14:53 Pagina 54