Electrical connection
WARNING!
The appliance may only be connected by an authorised expert. False connection can destroy
parts of the appliance. In such case, there is no right to warranty. Disconnect the appliance from
the power mains before any repair or maintenance operation.
NOTE!
The power cord connection is located at the front of the appliance. At least 900 mm length of the
power cord is required to lead it to the socket designated location behind the appliance.
Determining the existing electrical connection
NOTE!
Check the voltage. Before connecting the appliance, make sure the voltage specified on the
rating plate conforms to the voltage of your power mains. The voltage of your power mains
(220–240 V between L and N) should be checked by an expert using an appropriate measuring
device.
Check the voltages present as indicated in the diagrams below.
66
Installation
To Next Page
Loading...
