Indications on the display
StatusIn display
Power level ‘0’ for a cooking zone.
Power level that is set for a cooking zone; 1 = low / 12 = high.
Boost function active.
boost
The locking function is activated; the control panel is locked.
Residual heat indicator: The hob has a residual heat indicator for each cooking
zone to show which cooking zones are hot after the cooking zone is turned off.
Although the hob is switched off, the indicator will remain on as long as the
cooking zone is hot! Avoid touching those cooking zones when this indicator
is lit.
HOT SURFACE!
Danger! Risk of burns.
Error code; See chapter 'Troubleshooting'.
Degrees Celsius indication for Celsius°Cooking™ and PLUS programs.
Filter indicator (and touch key) for cleaning the grease filters or replacing the
recirculation filter.
Touch the key for 2 seconds to reset the filter indicator.
Extraction indication
• Steady light: extraction is on.
• When dimmed: extraction is disabled or in Air-Dry mode, or Synchro Control
is enabled (automatic extraction).
17
Your hob with integrated extractor
To Next Page
Loading...
