Safety
Faulty parts may only be replaced by original parts. The manufacturer
can only guarantee that original parts meet safety requirements.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order
to avoid a hazard.
Disconnect the appliance from the mains supply before starting any repair work.
If the safety instructions and warnings are not followed, the manufacturer cannot be held responsible
for any resulting damage.
This appliance should only be connected by a registered installer.
Check the appliance for transport damage. Do not connect a damaged appliance.
The air must not be discharged into a flue that is used for exhausting fumes from appliances burning
gas or other fuels (not applicable to appliances that only discharge the air back into the room).
Extraction hoods and other appliances that extract cooking vapours can affect the safe operation
of appliances that burn gas or other fuel (including those in other rooms) by backflowing combustion
gases. These gases can potentially lead to carbon monoxide poisoning. After installing an extraction
hood or other vapour extractor, the operation of appliances with flue gas extraction must be tested
by a competent person to ensure that the combustion gases do not flow back.
Local regulations concerning the discharge of air have to be fulfilled.
59
Installation
To Next Page
Loading...
