Placing pans and lids
We recommend placing pans as close to the tower as possible, within the dimensions of the cooking
zones. If a lid is used, place it at an angle on the pan with the opening towards the tower. This
ensures optimal extraction.
TIP!
The use of lids has advantages:
• The heat remains in the pan so that the contents reach the desired temperature faster. The
energy consumption is consequently lower.
• Most cooking vapours condense on the lid, allowing for less (moist) air extraction. With
recirculation, humidity levels increase significantly less as a result. In addition, the exhaust
module could run at a lower noise level.
Use the tower in the raised position for greater effectiveness, especially when using tall pans.
Air-Dry function
The Air-Dry function ensures that the extraction channels and grease filters are blown dry.
After 10 minutes, the Air-Dry function switches off automatically.
24
Use
To Next Page
Loading...
