Pyrocontrol
•
is a system which enables the oven to
automatically calculate the cleaning time
according to the level of soiling, making it
possible to save energy with a pyrolysis
cleaning time adapted to your real needs. If
you would like to delay the start time, select
the end time and modify this by entering the
desired pyrolysis end time.
Confirm your choice by pressing OK.
At the start of the cycle, the oven begins by
calculating the length of the pyrolysis cleaning
cycle according to the degree of soiling. This
phase lasts for several minutes and is indicated
by the rotating arrows on the screen (1).
The screen shows:
-
The rotating arrows (1)
-
The length of time remaining (2)
-
The scheduled pyrolysis cleaning end time
(3)
-
The time (4)
-
The door lock status (5)
The end of the pyrolysis cleaning
cycle
Your oven tells you when the pyrolysis cleaning
cycle is over.
As soon as the door unlocks, your oven indicates
that the cleaning cycle is complete.
Simply remove the burnt residue from the oven
cavity using a damp sponge.
Cleaning the outer surfaces
To clean both the electronic programmer window
and the oven door, use a window washing product
applied to a soft cloth. Do not use abrasive
creams or scouring sponges.
29
The Cleaning function
To Next Page
Loading...
