What if…
WHAT SHOULD YOU DO?POSSIBLE CAUSESIF YOU REALIZE THAT
Connect to power supply.
Change the fuse, checking that it is
16A.
Increase the temperature selected.
•
The oven isn't connected to the power
supply.
•
The fuse has blown.
•
The temperature selected is too low.
The oven isn't heating.
Contact the After-Sales Service.The door lock is faulty.The lock symbol is
flashing on and off.
Change the bulb.
Connect to power supply or change
fuse.
The lamp is unusable.
The oven isn't connected to the power
supply or the fuse has blown.
The light inside the oven
isn't working.
Check the door is properly closed
Contact the After-Sales Service.
Contact the After-Sales Service.
Contact the After-Sales Service.
The door is not shut properly.
The door-locking system is faulty.
The temperature sensor is faulty.
The plate that detects when the door is
shut is faulty.
Cleaning by pyrolysis
has not occurred.
The temperature of your choice has
been reached.
Your programmed cooking cycle is
complete.
During cooking.
When cooking is complete.
Your oven makes a
beeping noise
Normal operation.
To stop this, press on the button
and choose "Unlock".
When you press the buttons.
The cooker controls are locked (child
safety).
Your oven is displaying
a .
33
Troubleshooting