Cleaning the door (model WITH
PYROLYSIS function)
Disassembling the door
Warning
Before removing the glass, allow the appliance
to cool down.
1
Open the door completely and block it open
using the two red stops. They are supplied
with your machine in the plastic pack.
2
Remove the first attached window as
follows:
Insert the two red stops in the A slots
designed for this.
3
Clean the glass using a soft sponge and
washing-up liquid.
Do not immerse the glass in water. Do not
use abrasive creams or scouring sponges.
Rinse with clean water and dry off with a lint-free
cloth.
Warning
Do not use abrasive cleaning products or hard
metallic scrapers for cleaning the oven’s glass
door, as they could scuff the surface and cause
the glass to shatter.
4
If necessary, remove the door’s inner
composed of one or two sheets of glass
(depending on model), each of which has
a black rubber corner pad.
5
After cleaning, reposition the four rubber
pads, taking care to follow the indications
on the glass:
* top left: L
30
The Cleaning function
To Next Page
Loading...
