Associated Electrics TC3 - Bumpy Track Setting; Carpet with Foam Tires; One-Way Front Diff; Recommended Settings

BUMPY TRACK SETTING
Front Suspension:
1. Block carriers: 0°
2. Kickup: 2°
3. Toe-in: 0°
4. Toe-out: 0°
5. Camber: -1.5°
6. Ride height: 6mm
7. Anti-roll bar: none
8. Ackerman setting: std
9. Shock bodies: VCS
10. Shock piston: #2
11. Shock oil: 30wt
12. Spring: silver
13. Droop setting: 5
14. Camber link postion: std
15. Shock mounting: middle hole
Rear Suspension:
1. Toe-in: 2°
2. Anti-squat: 2°
3. Camber: -1.5°
4. Wheelbase: middle
5. Ride height: 6mm
6. Anti-roll bar: none
7. Shock bodies: VCS
8. Shock piston: #2
9. Shock oil: 25wt
10. Spring: green
11. Droop setting: 3
12. Camber link postion
Tower: std
Hub: std
13. Shock mounting: middle hole
General:
1. Battery postion: rear
2. One-way or Diff: diff
3. Drive shafts: alum CVD’s
4. Body: varies
5. Spur: 72
CARPET WITH FOAM TIRES
Front Suspension:
1. Block carriers: 4°
2. Kickup: 2°
3. Toe-in: 0°
4. Toe-out: 0°
5. Camber: -1.5°
6. Ride height: 4mm
7. Anti-roll bar: std
8. Ackerman setting: std
9. Shock bodies: VCS
10. Shock piston: #2
11. Shock oil: 70wt
12. Spring: white
13. Droop setting: 6
14. Camber link postion: std
15. Shock mounting: middle hole
16. Tires: Jaco orange purple
Rear Suspension:
1. Toe-in: 3°
2. Anti-squat: °
3. Camber: -2°
4. Wheelbase: middle
5. Ride height: 4mm
6. Anti-roll bar: std
7. Shock bodies: VCS
8. Shock piston: #2
9. Shock oil: 50wt
10. Spring: red
11. Droop setting: 4
12. Camber link postion:
Tower: upper inner hoe
Hub: std
13. Shock mounting- middle hole
14. Tires: Jaco purple
General:
1. Battery postion: rear
2. One-way or Diff: diff
3. Drive shafts: alum CVD’s
4. Body: varies
5. Spur: 72
ONE-WAY FRONT DIFF
(Worlds 2000)
Front Suspension:
1. Block carriers: 4°
2. Kickup: 2°
3. Toe-in: 0°
4. Toe-out: 0°
5. Camber: -2°
6. Ride height: 4.5mm
7. Anti-roll bar: std
8. Ackerman setting: std
9. Shock bodies: VCS
10. Shock piston: #2
11. Shock oil: 40wt
12. Spring: gold
13. Droop setting: 5.5
14. Camber link postion: upper inner hole
15. Shock mounting: inner hole
Rear Suspension:
1. Toe-in: 3°
2. Anti-squat: 0°
3. Camber: -2°
4. Wheelbase: middle
5. Ride height: 4.5mm
6. Anti-roll bar: std
7. Shock bodies: VCS
8. Shock piston: #2
9. Shock oil: 30wt
10. Spring: silver
11. Droop setting: 4
12. Camber link postion:
Tower: upper inner hole
Hub: std
13. Shock mounting: inner hole
General:
1. Battery postion: rear
2. One-way or Diff: one-way
3. Drive shafts: alum CVD’s
4. Body: varies
27
RECOMMENDED SETTINGS
Use these settings to start off with