ASTECH LDM41A - Page 8

General LDM41A and LDM42A Manual
Page 8 ASTECH GmbH
Special performance features are:
 Provides high accuracy and great reach under extreme outdoor
temperatures.
 Works in a wide range of operating voltages from 10 V= to 30 V= from an
on-board vehicle supply point, an industrial direct voltage supply net or a
DC power pack.
 Features consistently low power consumption of <1.5 W
1
(without I
Alarm
)
 Up to 30 m reach for distance measurement, with potential for more than
100 m reach if additional reflectors
2
are mounted onto the target
(depending on reflectance and environmental conditions).
 Visible Laser beam for easier sighting.
 RS232 interface port for input of measuring functions and commands from,
and output of measured values to, a PC or a laptop.
 Switching output and analog output are separately programmed.
 Switching output with adjustable limit and hysteresis.
 Measured values can be displayed in meters, decimetres, centimetres, feet
and inches due to.
 Option for remote triggering of a measurement from an external trigger
device.
3
1
inactive internal heating for devices with internal heating (LDM41-42A /h)
2
e.g. 3M, self adhesive foil white non glossy or foil 3290 for longer distances
3
Trigger function is not available for devices with internal heating (LDM41-42A /h)