USER manual
ENGLISH
57 of 260
COFFEE DISPENSING
• Put the coee cup under the
dispensing spout
• press the desired dose key, for
example
and wait for the
coffee to be dispensed (LED
comes on);
• to block in advance the coee
dispensing, press button
or button
STOP
PROG.
;
• in case of anomalies or block-
ing of the push-button panel,
use the manual switch (see AEP
version).
Do not remove the lter-holder from the delivery group during
coee dispensing
6.7 Steam dispensing
6.7.1 Version with rotating knob
• Immerse the steam nozzle in the
liquid to be heated;
• rotate the tap knob clockwise;
• the quantity of steam will be
proportional to the opening of
the tap;
• to stop the dispensing, rotate
the tap knob clockwise;
Use the steam spout carefully by means of the specic anti-scald
rubber (6).
Avoid contact with the steam nozzles, do not direct your hands or
other body parts towards the steam nozzle ends.
For optimal foaming, it is recommended to observe
the following simple rules:
• heat only the amount of milk you intend to use; once
heated, it will have to be completely poured from the
jug and not heated again:
• foam the milk starting from a temperature of about
4 °C.
6