Astoria AEP - Page 64

USER manual
64 of 260
6.14.2 Clock programming
Modify time, date and day of the week:
• Enter programming until the following is displayed;
• modify the param-
eter at the ashing
stage by means of
buttons (
+ ) and ( - );
• to move to the next parameter, press the (
ENTER )
button;
• to move to the next programming, press button
(
MODE ).
6.14.3 Switch-on programming
Programming the machine automatic switch-on:
• Enter programming until the following appears on
the display;
• set the machine
switch-on time by
means of buttons (
+ ) and ( - );
• To switch from hours to minutes and vice versa press
button (
ENTER );
• To move on to the next programming press button
(
MODE );
• To deactivate the “Switch-on” function set the time
to 00:00.
6.14.4 Programming Switching o
Programming of the automatic switching o of the
machine:
• Enter programming
until the following
appears on the dis-
play;
• Set the machine switch o time by means of buttons
(
+ ) and ( - );
• To switch from hours to minutes and vice versa press
button (
ENTER );
• To move on to the next programming press button
(
MODE );
• To deactivate the “Switching o function set the time
to 00:00.
CLOCK SETUP
09:16 18-10-12 1
AUTO ON/OFF
ON 08:00
AUTO ON/OFF
OFF 23:00
6.14.5 ProgrammingDay of rest
To program machine shutdown for rest day(s), follow
the instructions below:
• Enter programming
until the display
shows:
• Select the day/s rest for the machine, scrolling with
buttons (
+ ) and ( - );
• by means of the (
ENTER ) button. Deactivate or reac-
tivate the wanted day/s rest.
Example of machine
rest Tuesday and Thurs-
day.
Example of machine
without any days rest.
Table of the days of the week
1 Monday 5 Friday
2 Tuesday 6 Saturday
3 Wednesday 7 Sunday
4 Thursday
In the days of the week in which the Days of rest function “ - “ was
activated, the machine remains switched o.
6.14.6 Programming Regeneration of water softener
Programming of the automatic notice of the need to
regenerate the water softener:
• Enter programming
until the following
appears on the dis-
play;
• Set the quantity of water (steps of 50 litres) by means
of buttons (
+ ) and ( - );
• to move to the next programming, press button
(
MODE ).
When the machine reaches 90% of the value set on the display a
signal appears for 5 seconds. Once 100% of the set value is reached,
an intermittent signalling is displayed. The regeneration control
is bypassed by setting a value equal to 00000 litres.
DAYS WORKED
1-3-567
DAYS WORKED
1234567
DAYS WORKED
1234567
REG. SOFTENER
00000