20
3.2.4.3 MAC Filter Setting
Wireless MAC lter provides control over packets transmitted to
a specied MAC (Media Access Control) address on your wireless
network.
To set up the Wireless MAC lter:
1. From the navigation panel, go to Gateway > Connection tab.
2. Select Wi-Fi from the dropdown menu.
3. In the SSID eld, select the network name that you want to
use for the Wireless MAC lter.
4. In the MAC Filtering Mode dropdown list, select either
Allow or Deny.
• Select Allow to allow devices in the MAC lter list to access
to the wireless network.
• • Select Deny to prevent devices in the MAC lter list to
access to the wireless network.
5. Click the add icon to on the Wi-Fi device list, or key in the
Device Name and its MAC address of the wireless device and
click the add icon.
6. When done, click Save Filter Setting.
To Next Page
Loading...
