Asus ESC4000A-E10 - System Specifications

ASUS ESC4000A-E10
1-3
1.3 System specifications
The ASUS ESC4000A-E10 Series servers features the ASUS KRPG-U8 server board that
supports AMD EPYC™ 7002 Series Processor Family.
(continued on the next page)
Model Name ESC4000A-E10
Processor / System Bus
AMD EPYC™ 7002 Series Processor Family (up to TDP 280W)
Memory
Total Slots
8 (8-channel per CPU, 8 DIMM per CPU)
Capacity
Up to 2TB
Memory Type
DDR4 3200 RDIMM
* Please refer to www.asus.com for latest memory AVL update
Memory Size
256GB, 128GB, 64GB, 32GB, 16GB*
* Please refer to www.asus.com for latest memory AVL update
Expansion
Slots
Total PCI/PCI-X/
PCI-E/PIKE Slots
11
Slot Type
Full-length/Full-height:
4 x PCI-E 4.0 x16 link for double-deck GPU / Full Length cards
or 8 x PCI-E 4.0 at x16 link with PLX SKU Board for single-deck
GPU Cards
Half-length/Low-profile:
2 x PCI-E 4.0 x16 for butterfly riser slot
1 x PCI-E 4.0 x8 for internal HBA/RAID card
Storage Bays
8 x 2.5" or 3.5" Hot-swap Storage Device Bays
(2 x NVMe as default; up to 4 x NVMe Supported)
Networking
LAN
2 x 1Gb/s LAN ports (Intel
®
I350-AM2)
1 x Dedicated management port
Graphic
VGA
AST2500 64MB
Security
TPM2.0
Front I/O ports
4 x USB 3.2 Gen 1 ports
Rear I/O ports
2 x USB 3.2 Gen 1 ports
2 x Gigabit LAN ports (RJ45)
1 x Management port (RJ45)
1 x VGA port
Switch/LED
Front Switch/LED:
1 x Power Switch/LED
1 x Location Switch/LED
1 x HDD Access LED
1 x Message LED
1 x Q-Code/Port 80 LED
2 x LAN LED
Rear Switch/LED:
1 x Power switch/LED
1 x Location LED
1 x Message LED
1 x HDD Access LED