Chapter 2: Hardware Setup
2-28
2.7 SATA/SAS backplane cabling
connect to mini-SAS HD connectors 1 and 2 on the
motherboard. With two mini-SAS HD cables connected, a
total number of 8 SAS/SATA HDDs can be supported
connect to SLIMPCIE1 on the motherboard to support 2
NVMe devices
connects to the system fans
red
PWR1 FAN_PWR1
yellow yellow
black
black
* Ensure to connect the corresponding 8-pin plugs to PWR1 and FAN_PWR1 as shown below:
To Next Page
Loading...
