5-5
ASUS ESC4000A-E10
4. The utility verifies the file, then starts updating the BIOS file.
DO NOT shut down or reset the system while updating the BIOS to prevent system boot
failure!
5. The utility returns to the DOS prompt after the BIOS update process is completed.
Reboot the system from the hard disk drive.
The BIOS update is finished! Please restart your system.
C:\>
Current Platform
Platform : KRPG-U8
Version : 0301
Build date: 05/22/2020
New Platform
Platform : KRPG-U8
Version : 0301
Build date: 05/31/2020
ASUS Tek. EzFlash Utility
Start Programming Flash. DO NOT SHUTDOWN THE SYSTEM!!!
Write
75%
To Next Page
Loading...
