1-26 Chapter 1: Product introduction
5. CPU and Chassis fan connectors
(4-pin CPU_FAN1, 4-pin CHA_FAN1)
The fan connectors support cooling fans of 350mA~740mA (8.88W max.) or
a total of 1A~2.22A (26.64W max.) at +12V. Connect the fan cables to the fan
connectors on the motherboard, making sure that the black wire of each cable
matches the ground pin of the connector.
P5VDC-TVM SE
®
P5VDC-TVM SE Fan connectors
CPU_FAN1
CHA_FAN1
GND
CPU FAN PWR
CPU FAN IN
CPU FAN PWM
GND
CPU FAN PWR
CPU FAN IN
CPU FAN PWM
6. Digital Audio connector (4-1 pin SPDIF_OUT1)
This connector is for the S/PDIF audio module to allow digital sound output.
Connect one end of the S/PDIF audio cable to this connector and the other
end to the S/PDIF module.
The S/PDIF out module is purchased separately.
P5VDC-TVM SE
®
P5VDC-TVM SE Digital audio connector
SPDIF_OUT1
+5V
SPDIFOUT
GND
Do not forget to connect the fan cables to the fan connectors. Insufcient air
ow inside the system may damage the motherboard components. These are
not jumpers! DO NOT place jumper caps on the fan connectors.