Asus P5VDC-TVM SE - Page 40

1-28 Chapter 1: Product introduction
8. USB connectors (10-1 pin USB56, USB78)
These connectors are for USB 2.0 ports. Connect the optional USB/GAME
module cable to any of these connectors, then install the module to a slot
opening at the back of the system chassis. These USB connectors comply
with USB 2.0 specication that supports up to 480 Mbps connection speed.
The USB/GAME module is purchased separately.
P5VDC-TVM SE
®
P5VDC-TVM SE USB 2.0 connectors
USB56
USB+5V USB_P6- USB_P6+ GND NC
USB+5V
USB_P5-
USB_P5+
GND
1
USB78
USB+5V USB_P8- USB_P8+ GND NC
USB+5V
USB_P7-
USB_P7+
GND
1
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
9. IEEE 1394a port connector (10-1 pin IE1394_1) (Optional)
This connector is for a IEEE 1394a port. Connect the IEEE 1394a module
cable to this connector, then install the module to a slot opening at the back
of the system chassis.
P5VDC-TVM SE
®
P5VDC-TVM SE IEEE 1394a connector
IE1394_1
1
TPA1- GND TPB1- +12V GND
TPA1+
GND
TPB1+
+12V
Never connect a USB cable to the IEEE 1394a connector. Doing so will damage
the motherboard!