Rubber Track Loader
8. Loader/Transmission Controls Disassembly and Assembly
8-2
! WARNING !
Lower all attachments and make sure the oil is cool
before removing any components or lines. Hot oil can
cause personal injury.
1. Lower the lift arms to the ground.
2. Turn the engine switch to the OFF position, and
disconnect the battery.
3. Remove the throttle linkage from the throttle
handle.
Figure 8-1
Figure 8-2
Figure 8-3
4. Remove mounting screws from the plastic
console.
Figure 8-4
Figure 8-5
To Next Page
Loading...
General