EN 11
USING YOUR APPLIANCE
Customising the recommended temperture
Select the cooking function:
• Press the knob to confirm.
If you wish to customise the recommended temperature:
• Press the temperature key until the temperature display begins
flashing.
• Set the temperature with the knob.
• Press the knob to confirm.
Using the timer function
Your oven’s programmer can be used as an independent timer that
allows you to count down time without using the oven.
In this case, the “minute minder” display takes priority over the clock
display.
• Press the time button.
• The “minute minder” symbol and “0m00” flash.
• Set the time using the knob.
• Press the knob to confirm.
The display stops flashing after a few seconds and the “minute minder”
starts to run, counting down the time in seconds.
Once the time is up, the “minute minder” emits a series of beeps to let
you know.
The beeps can be stopped by pressing any touch button.
Note
A cooking programme can be started at the same time as the
“minute minder” function. It is possible to change or cancel the timer
programme at any time by pressing the time button then setting the
time to 0:00 and confirming.
W
To Next Page
Loading...
