EN 29
Faults table
When in doubt about the proper operation of your appliance, this does
not automatically mean there is a defect. Make sure to check the points
mentioned below in the table first, or visit our website ‘www.atag.nl’ for
more information.
If you suspect that your appliance is not working properly, it may not
necessarily be broken. In all cases, check the following items:
Query What to do
The time counts down but the appliance is
not working (the turntable is not rotating and
food is not heating). “Time” and “Demo” fl ash
alternately in the display.
Your appliance is in DEMONSTRATION mode.
To return to normal mode, set the time to
“00:00” and press the ‘TEMPERATURE’,
‘TIME’ and ‘STOP’ buttons again until
“DEMO” disappears from the display
The appliance does not start.
Check that your appliance is plugged in.
Check that your oven’s door is fully closed.
Check that the child safety feature is not
activated.
The appliance continues to make noise after
cooking has ended.
To drain residual water vapour, your
appliance is equipped with a delayed
ventilation feature.
The fan continues to function for 15 minutes
after the end of the programme.
The appliance is noisy.
The turntable does not rotate properly.
Clean the wheels and the rolling area under
the turntable.
Check that the wheels are correctly
positioned.
You notice steam on the window. Wipe the condensation off using a cloth.
Food is not heated during a microwave
programme.
Ensure that the cookware is suitable for
microwave ovens and that the power level is
appropriate.
The grill gives off smoke at the beginning of
a programme.
Remove all cooking residue from the heating
element before each use.
The appliance produces sparks.
Thoroughly clean the appliance: remove
grease, cooking residue, etc.
Remove any metal items from the walls of the
oven.
Never use metal items with the rack.
TROUBLESHOOTING
To Next Page
Loading...
