99
3 The message on the screen left
appears.
Press OK to reset the error,
otherwise the previous screen is
shown.
4 The Reset in Progress message
appears.
5 After a while the Fault Solved
message appears.
After the code is reset, the Home
screen appears.
When there are several errors active,
it is possible to scroll trough them by
pushing the ESC button. Last page is
the main display. When there are no
button activities for 30 sec., the last
error will be displayed again. At the
master boiler all errors of the cascade
system will be displayed.
Errors
Reset a Fault code
1 When an error occurs, the fault code and description appear on the screen.
2 To reset the fault code, press the RESET button.
The settings are accessable
through a code.
To Next Page
Loading...
Need help?
General
