-6-
2. Measurements
①Wipe the sample stage clean.
②Fill the sample stage with the sample
solution to the fill line.
③Press F.
---flashes, and then the scale name is
displayed next to the battery indicator.
Then, the measurement value and
temperature will be displayed.
N
Measure room temperature (distilled)
samples. The instrument should also
be acclimated to room temperature
prior to operations.
N
Try stirring the sample on the sensor
during measurement to improve the
repeatability of oily/fatty samples.
m
The measurement evaluation indicator
will light up if a tolerance is set for the
scale used (
r
page 10).
m
The indicator will not activate for
erroneous results (including
temperature errors).
m
Set the upper and lower limits to 00.0 to
turn off the measurement evaluation
indicator.
Fill line
To Next Page
Loading...
Need help?
General
