ATAGO RePo-1 - Cleaning

-8-
3. Cleaning
 CAUTION
●
Ensure that the sample stage is clean before measurement.
●
Clean the sample stage immediately after each measurement.
●
Thoroughly dry the instrument before storing.
●
Do not use benzene (paint thinner) on the instrument.
●
Store away from direct sunlight at a stable temperature with as little
fluctuation as possible.
①Collect the sample
solution with a pipette
and wipe it off.
③Dry the sample stage
completely with dry
tissues.
Ethyl
alcohol
Mild soap
For oily samples
Clean oily residues with
ethyl alcohol or mild soap,
and then, rinse with water.
②Apply some water and
wipe it off.
a
a
N Clean the prism
and the optical path
window particularly
well.
Prism
Optical path window
Can be washed under running
water.
Thoroughly dry the instrument
before storing.
N
Moisture may accumulate in
the grooves of the buttons, but
this will not affect the
instrument.