AT&T DLP73410 - Page 49

43
Telephone settings
Telephone base settings
Ringer volume
Youcansettheringervolumeleveltooneofsixlevelsorturntheringero.
Whentheringeriso, appears on the screen.
To set the ringer volume on home line:
1. Press MENU/SELECT in idle mode.
2. Press CID or DIR to highlight Ringers, then press
MENU/SELECT.
3. Press MENU/SELECT to select Home volume.
4. Press CID or DIR to sample each ringer volume for
home line.
5. Press MENU/SELECT to save.
To set the ringer volume on cell lines:
1. Press MENU/SELECT in idle mode.
2. Press CID or DIR to highlight Ringers, then press
MENU/SELECT.
3. Press CID or DIR to select Cell volume, then press
MENU/SELECT,
4. Press CID or DIR to sample each ringer volume for cell
lines.
5. Press MENU/SELECT to save.
Notes:
f The telephone base ringer volume also determines the ringer volume for intercom calls.
f If the ringer volume is set to off, the telephone base is silenced for all incoming calls.
RINGER VOLUME
Bluetooth
>Ringers
>Home volume
Home ringtone
RINGER VOLUME
Bluetooth
>Ringers
>Cell volume
Cell ringtone