AT&T DLP73410 - Page 50

44
Telephone settings
Telephone base settings
Ringer tone
You can choose one of ten ringer tones.
To set the ringer tone on home line:
1. Press MENU/SELECT in idle mode.
2. Press CID or DIR to highlight Ringers, then press
MENU/SELECT.
3. Press CID or DIR to highlight Home ringtone, then
press MENU/SELECT.
4. Press CID or DIR to sample each ringer tone for
home line.
5. Press MENU/SELECT to save.
To set the ringer tone on cell lines:
1. Press MENU/SELECT in idle mode.
2. Press CID or DIR to highlight Ringers, then press
MENU/SELECT.
3. Press CID or DIR to select Cell ringtone, then press
MENU/SELECT,
4. Press CID or DIR to sample each ringer tone for cell
lines.
5. Press MENU/SELECT to save.
Note: If you turn off the ringer volume, you will not hear ringer tone samples.
Bluetooth
>Ringers
Home volume
>Home ringtone
RINGER TONE
>1
Bluetooth
>Ringers
Cell volume
>Cell ringtone
RINGER TONE
>1