AT&T DLP73410 - Page 51

45
Telephone settings
Telephone base settings
Set date/time
The answering system announces the day and time of each message prior
to playing it. Before using the answering system, set the date and time as
follows. If you subscribe to caller ID service, the day, month and time are set
automatically with each incoming call. The year must be set so that the day
oftheweekcanbecalculatedfromthecallerIDinformation.Youcanturno
the date and time settings of the caller ID service and set the date and time
manually (see Use caller ID to automatically set date and time on page 51).
Aerapowerfailure,thesystempromptsyoutosetthedateandtime.
To set the date and time manually:
1. When the telephone base is in idle mode, press MENU/SELECT to enter the
main menu.
2. Press qCID or pDIR to scroll to Set date/time and
then press MENU/SELECT.
3. Press qCID or pDIR to select the month, then press
MENU/SELECT, or enter the number using the
dialing keys.
4. Press qCID or pDIR to select the day, then press
MENU/SELECT, or enter the number using the
dialing keys.
5. Press qCID or pDIR to select the year, or enter the
number using the dialing keys, then press
MENU/SELECT to move on to set the time.
6. Press qCID or pDIR to select the hour, then press
MENU/SELECT, or enter the number using the dialing
keys.
7. Press qCID or pDIR to select the minute, then press MENU/SELECT, or enter
the number using the dialing keys.
8. Press qCID or pDIR to highlight AM or PM, or press 2 for AM or 7 for PM.
Press MENU/SELECTtoconrm.Thereisaconrmationtoneandthescreen
returns to the previous menu.
Notes: If the clock is not set when a message is recorded, the system announces, “Time and day not set,” before it
plays the message.
SET DATE
MM/DD/YY
SET TIME
HH:MM --
Ringers
>Set date/time