EasyManua.ls Logo

AT&T PARTNER - Page 56

AT&T PARTNER
130 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1 = Assigned
2 = Not Assigned
Changing Settings
To assign a doorphone, internal hot line phone, or emergency phone extension,
follow these steps from extension 10:
1. Press [ Feature ] [ 0 ] [ 0 ].
The phone beeps once, and the light next to [
Spkr
] is green flutter.
2. Press left [ Intercom ] twice.
The light next to left [
Intercom
] is green steady.
3.
Press [
#
] [
6
] [
0
] [
4
].
4.
Dial the two-digit number of the extension you want to assign (see Valid
Entries on the previous page).
The Message light is red steady if Doorphone/Internal Hot Line
Phone/Emergency Phone is Assigned, red flash if it is Not Assigned.
5.
Press [
1
] to assign Doorphone/Internal Hot Line Phone/Emergency Phone, or
press [
2
] to unassign Doorphone/Internal Hot Line Phone/Emergency
Phone.
The Message light changes to show the new setting.
6.
If you make a mistake or want to change the setting for another extension,
begin again at Step 3.
7.
When you are finished, press [
Feature
] [
0
] [
0
], and then follow the instructions
below.
To store the extension number of the alert extensions to ring when the
doorphone button is pressed or when the internal hot line phone’s handset is
picked up, or the outside number to dial when the emergency phone’s handset
is picked up, follow these steps from extension 10:
1. Press [ Feature ] [ 0 ] [ 0 ].
2. Press left [
Intercom ] twice.
3.
Press right [
Intercom ].
4.
Dial the two-digit extension number assigned to the doorphone, internal hot
line phone, or emergency phone.
5.
Press the leftmost programmable Auto Dial button on the upper row of Auto
Dial buttons.
6.
To store an alert extension number or an outside emergency phone number:
For an alert extension number, press left [
Intercom
] and the two-digit
extension number. Press left [
Intercom
] and [
7
] to alert all system
extensions.
For an outside emergency number, dial the phone number (up to 20
digits). For example, to store 555-2398, press [
5
] [
5
] [
5
] [
2
] [
3
] [
9
] [
8
].
7.
To store an alert extension number or outside emergency phone number for a
different extension, begin again at Step 3.
8.
When you are finished, press [
Feature
] [
0
] [
0
].
Doorphone/Internal Hot Line Phone/Emergency Phone (#604)
5-15

Table of Contents

Related product manuals