EasyManua.ls Logo

AT&T PARTNER - Special Dialing Functions

AT&T PARTNER
130 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Special Dialing Functions
Description
Special functions may be needed for System Speed Dial numbers and Auto Dial
numbers. Functions you can use are:
Function
Button Display
Description
Pause
[ Hold ] P
Inserts a 1.5-second pause in the dialing
sequence to wait for a response, such as a
dial tone or computer voice message.
Recall
[ Spkr ] R
Sends a timed switchhook flash needed to
alert the system on the other end (such as a
PBX or Centrex system), and to use a local
phone company custom calling feature (such
as Call Waiting). Use Recall only as the first
entry in an Auto Dial or Speed Dial number.
Stop
[ Mic ] S
Stops the dialing sequence until the Auto Dial
button or Speed Dial number is used again
(for example, so the user can enter additional
digits, such as a credit card number or
password). To continue, press the Auto Dial
button, or press [
Feature
] and the two-digit
Speed Dial code. (Stop cannot be used on
an MLS-6 or MLC-6 phone, since it has no
[ Mic ] button.)
Touch-Tone [
Transfer ] T
Sends touch tones over a rotary line to
Enable
electronic equipment such as answering
machines and bank computers.
Examples
Pause.
To call an answering machine at 555-0529, wait 4.5 seconds, then
dial 321 to retrieve messages, enter [
5
] [
5
] [
5
] [
0
] [
5
] [
2
] [
9
] [
Hold
] [
Hold
]
[
Hold
] [
3
] [
2
] [
1
].
Recall:
To use a favorite Centrex/PBX feature, you have to send a timed
switchhook flash, a pause, and then dial the feature. To do so, enter
[ Spkr ] [ Hold ] [] [ 3 ] [ 8 ].
Stop:
Your local bank-by-phone service requires that you enter a password
before an account number. To set up an Auto Dial button to call the bank at
555-7898, stop so you can enter a password, and continue with the account
number 6798, enter [
5
] [
5
] [
5
] [
7
] [
8
] [
9
] [
8
] [
Mic
] [
6
] [
7
] [
9
] [
8
]. To use,
press the Auto Dial button. The system dials 555-7898 and stops. Enter
your password and press the Auto Dial button again. The system dials 6798.
Touch-Tone Enable:
Your system is connected to rotary lines but you want
to call an answering machine at 555-3454 to retrieve messages. Since the
machine requires touch tones, enter [
5
] [
5
] [
5
] [
3
] [
4
] [
5
] [
4
] [
Transfer
]. All
digits pressed during the rest of the call are sent as touch tones.
5-32
Special Dialing Functions

Table of Contents

Related product manuals