About This Guide
Purpose
This guide explains how to set up and use the PARTNER® Communications
System. It is intended for the person who will install and manage the system.
Terminology
Throughout this guide, the PARTNER Communications System is referred to
simply as the system. In addition, this guide refers to AT&T telephones
specifically designed to work with the system as system phones. System
phones include the MLS-18D™, MLS-12D™, MLS-12™, MLS-6™, and MLC-6
model telephones. You can also use industry-standard telephones with the
system, which are referred to as standard phones in this guide.
How to Use This Guide
■
If you are a new user, read Chapters 1 and 3 to familiarize yourself with
the system’s features and to learn about system phones.
■
If you are installing the system for the first time, read Chapters 1 through
3 and Appendix C, which will give you an overview of the system
components, and instructions for installing and customizing them. If you
are installing auxiliary devices, also see Chapter 4.
■
If you need to change factory settings, see Chapter 2, “Customizing Your
System” and Chapter 5 “Feature Reference” or the Customization Quick
Reference at the back of this guide.
■
If you are adding equipment to an existing system, see Appendix C,
“Installation” and Chapter 4, “Using Auxiliary Equipment.”
■
Once you are experienced with the system, use the Table of Contents or
Index to locate the information you need.
About This Guide
iii
To Next Page
Loading...
Need help?
General
