3.
Press [
#
] [
6
] [
0
] [
2
].
The Message light is red steady if the current setting is Tones On Hold, red
wink if it is Music On Hold, or red flash if it is Not Active.
4.
Press [
1
] to select Tones On Hold, [
2
] to deactivate Music and Tones On Hold,
or [
3
] to select Music On Hold.
The Message light changes to show the new setting.
5.
If you make a mistake, begin again at Step 3.
6.
When you are finished, press [
#
] and a three-digit code for another option or
press [ Feature ] [ 0 ] [ 0 ].
Music/Tones On Hold (#602)
5-25
To Next Page
Loading...
