4.
Dial the two-digit number of the extension (10–21) you want to change.
The Message light is red steady if the current setting is No Restriction, red
flash if it is Inside Only, or red wink if it is Local Only.
5.
Press [
1
] for No Restriction, [
2
] for Inside Only, or [
3
] for Local Only.
6.
If you make a mistake or want to change the setting for another extension,
begin again at Step 3.
7.
When you are finished, press [
#
] and a three-digit code for another option or
press [ Feature ] [ 0 ] [ 0 ].
Outgoing Call Restriction (#401)
5-27
To Next Page
Loading...
