Syn248 Installation and Configuration Guide Back to Contents
System Configuration 75
How to Upgrade Software After Adding a New Device
Upgrading Syn248 software is simple. You need a reliable Internet connection for your
network.
After you connect your new Deskset, the screen prompts you to upgrade the software. If
you have more than one Deskset to install, connect them all and wait for the upgrade
prompt to appear on all Desksets.
If you press :
All Syn248 devices in the system will be upgraded. If you have multiple Desksets
to install, you only have to press on one of the Desksets.
After the upgrade, all Syn248 devices will reboot. Wait approximately five
minutes for the reboot process to complete.
Once the entire system is upgraded, any Deskset with old software that you
connect in the future will be upgraded automatically.
If you want to defer the upgrade and press :
The device will work with the current software version on all devices, but with no
enhanced features.
The phone will no longer ask you to upgrade.
You can perform a site-wide software upgrade later. See “To update all devices
to the latest software version:” on page 76.
To Next Page
Loading...
