Syn248 Installation and Configuration Guide Back to Contents
System Configuration 76
Running a Software Update
To update all devices to the latest software version:
1. In the navigation menu at left, click Device Management, then Update Device.
The Update Device page appears.
2. Click . The system looks on the Internet for the latest software and
systematically updates and then restarts each device. All calls are dropped.
A caution appears to remind you that all devices will be restarted as each is updated.
Any Desksets registered with the system but disconnected at the time of the
update will be updated as soon as they are reconnected to the system.
After you have started an update using , attempts to
manually update a device through the device itself or the WebUI may be
interrupted by the system software update in progress.
To Next Page
Loading...
