AT&T TL96456 - Page 113

106
Call block
Call block
Using the telephone base:
Search for the desired caller ID log entry (see Review the caller ID log on
page 96).
When the desired entry displays, press SAVE.
Press CID or DIR to highlight Call block, then press SELECT.
The screen displays EDIT NUMBER. Use the dialing keys to edit the number,
when necessary.
Press CID or DIR to move the cursor to the left or right.
Press BACKSP or X/DELETE to erase a digit.
Press and hold X/DELETE to erase all digits.
Press and hold REDIAL/PAUSE to insert a three-second dialing pause
(a p appears).
Press NEXT to move to the name.
The screen displays EDIT NAME. Use the dialing keys to add or edit
the name.
Press CID or DIR to move the cursor to the left or right.
Press 0 to add a space.
Press BACKSP or X/DELETE to erase a character.
Press and hold X/DELETE to erase all characters.
Press # (pound key) to move the last word to the front. For example,
Johnson Charlie becomes Charlie Johnson when you press # (pound key).
Press SAVE when done and the screen displays Saved.
1.
2.
3.
4.
•
•
•
•
5.
6.
•
•
•
•
•
7.