69
Multiple handset use
Intercom
Use the intercom feature for conversations between two handsets, a handset
and the telephone base, or a handset/telephone base and a cordless headset/
speakerphone (sold separately).
You can buy additional expansion handsets (AT&T model TL90076, sold
separately), cordless headsets and speakerphones for this telephone system.
You can register up to 12 handsets or 10 cordless handsets and two cordless
headsets/speakerphones to the telephone base.
Initiate an intercom call
Using a handset:
Press MENU in idle mode.
Press CID or DIR to highlight Intercom, then press
SELECT .
If you have one handset and no other registered device,
your handset displays Calling base.
If you have other registered device(s) or more than one
handset, your handset displays INTERCOM TO: and a
list of registered devices.
Press CID or DIR to highlight a destination device
or all devices, then press SELECT.
-OR-
Use the dialing keys to enter a specific device number (0 for the
telephone base, or 1-9 for handset 1-9, TONE followed by 0-2 for
handset 10-12, or # for a single headset/speakerphone, # followed by
1 or 2 for headset/speakerphone 1 or 2, or TONE followed by # for
all devices).
Your handset displays Calling HANDSET X, Calling BASE 0, Calling headset
or Calling all.
The destination device(s) rings and shows
HANDSET is calling
,
HANDSET X is calling
or
HANDSET X is calling all (HANDSET represents
the handset name, X represents the handset number).
1.
2.
•
•
Answering sys
Directory
Caller ID log
Intercom
BACK
SELECT
INTERCOM TO:
BASE 0
HANDSET 2
All
BACK
SELECT
To Next Page
Loading...
