AT&T TL96456 - Review the Call Block List; Save a Caller ID Log Entry to Call Block List

105
Call block
Review the call block list
Press MENU in idle mode.
Press CID or DIR to highlight Call block, then
press SELECT.
Press SELECT to choose Block list.
Press SELECT again to choose Review.
Press CID or DIR to browse through the call block
entries.
NOTES:
Call block list is empty. Add new entry? appears if there are no call block entries.
Only one handset or the telephone base can review the caller ID log at time. If another handset
tries to enter the directory, caller ID log or call block list, it shows Not available at this time.
Save a caller ID log entry to call block list
Using the handset:
Search for the desired caller ID log entry (see Review the caller ID log on
page 96).
When the desired entry displays, press SAVE.
Press CID or DIR to highlight Call block, then press SELECT.
The screen displays EDIT NUMBER. Use the dialing keys to edit the number,
when necessary.
Press CID or DIR to move the cursor to the left or right.
Press BACKSP or MUTE/DELETE to erase a digit.
Press and hold MUTE/DELETE to erase all digits.
Press and hold REDIAL/PAUSE to insert a three-second dialing pause
(a p appears).
Press NEXT to move to the name.
The screen displays EDIT NAME. Use the dialing keys to add or edit
the name.
Press CID or DIR to move the cursor to the left or right.
Press 0 to add a space.
Press BACKSP or MUTE/DELETE to erase a character.
Press and hold MUTE/DELETE to erase all characters.
Press # (pound key) to move the last word to the front. For example,
Johnson Charlie becomes Charlie Johnson when you press # (pound key).
Press SAVE when done and the screen displays Saved.
1.
2.
3.
4.
5.
•
•
1.
2.
3.
4.
•
•
•
•
5.
6.
•
•
•
•
•
7.
Call block
BLOCK LIST
Review
Add new entry
BACK SELECT
BLOCK LIST
Review
Add new entry
BACK SELECT