AT&T TL96456 - Delete a Redial Entry

66
Telephone operation
Redial
Using the telephone base:
Press REDIAL/PAUSE in idle mode.
Press CID, DIR or REDIAL/PAUSE repeatedly to browse until the desired
number displays.
Press SAVE.
The screen displays EDIT NUMBER. Use the dialing keys to edit the number,
if necessary.
Press CID or DIR to move the cursor to the left or right.
Press BACKSP or X/DELETE to erase a digit.
Press and hold X/DELETE to erase all digits.
Press and hold REDIAL/PAUSE to insert a three-second dialing pause
(a p appears).
Press NEXT.
The screen displays SELECT LABEL. Press CID or DIR to select one of the
following label:
Home
Cell
Work
Other
The screen displays ENTER NAME. Use the dialing keys to enter a name
(up to 15 characters). Press a key repeatedly until the desired character
shows on the screen (see Character chart on page 87).
Press CID or DIR to move the cursor to the left or right.
Press 0 to add a space.
Press BACKSP or MUTE/DELETE to erase a character.
Press and hold MUTE/DELETE to erase all characters.
Press a>A to change the next letter to upper or lower case.
Press SAVE and then Saved displays. You hear a confirmation tone.
Delete a redial entry
Press REDIAL/PAUSE in idle mode.
Press CID, DIR or REDIAL/PAUSE repeatedly to browse until the desired
number displays.
Press MUTE/DELETE on the handset or X/DELETE on the telephone base to
delete the displayed number. You hear a confirmation tone.
1.
2.
3.
4.
•
•
•
•
5.
6.
•
•
•
•
7.
•
•
•
•
•
8.
1.
2.
3.