AT&T TL96456 - Answer a PTT Call

81
Multiple handset use
Push-to-talk (PTT)
Answer a PTT call
You can respond to a PTT call, as described below.
When your device receives a PTT call, it beeps and shows Press and hold
[PTT] to talk.
When the other party is speaking, your speakerphone light is on, and your
device shows:
PTT From HANDSET X To devices: X (the first X represents the initiating
handset number, and the second X represents your handset number; a
maximum of four handset numbers appear).
-OR-
PTT From Base 0 To devices: X (the X represents your handset number;
a maximum of four handset numbers appear).
When your speakerphone light is off (the screen shows Press and hold
[PTT] to talk), press and hold PUSH TO TALK on your handset or PTT/FLASH
on your telephone base. You will hear a chirp. Speak towards the device.
While you are speaking, your device shows PTT To BASE 0 or PTT to
HANDSET X (X represents the destination handset number) or PTT To
devices: X (X represents the handset numbers of one or more destination
handsets; a maximum of four handset numbers appear).
Your voice is broadcast to all destination devices.
After speaking, release PUSH TO TALK on your handset or PTT/FLASH
on your telephone base. Your device will beep. After the beep, if your
speakerphone light is off, you can press and hold PUSH TO TALK on your
handset or PTT/FLASH on your telephone base to continue speaking, or the
destination device can respond.
1.
2.
•
•
3.
•
•