AT&T TL96456 - Search by Name; Dial a Directory Entry

90
Directory
Create and review entries
Search by name
You can use the enhanced 3-character search to find your contacts quickly
and efficiently.
Follow the steps in Review the directory on the previous page to enter
the directory.
When an entry appears, use the dialing keys to enter the letters associated
with the name (see page 87). You can enter up to three letters for the
search. The letters will show at the top left hand corner of the screen. After
you have entered one to three letters, the system starts searching in the
directory. If there is no name matching the letter(s) entered, the next closest
match in alphabetical order appears. If necessary, press CID or DIR to
browse.
NOTE: The cursor automatically moves to the next position two seconds after you enter
a letter. If you do not enter another letter in the coming two seconds, the system starts
searching in the directory.
Dial a directory entry
You can dial a directory entry on either a home or cell line.
Search for the desired entry in the directory (see Review the directory on
page 89 and Search by name on this page).
When the desired entry appears, press # (pound key) repeatedly to show
different dialing options, if necessary.
When the displayed number is in the correct format, press HOME/FLASH or
/SPEAKER on the handset or HOME on the telephone base to dial with
the home line. Press CELL 1 or CELL 2 on the handset or telephone
base to dial with the cell line.
1.
2.
1.
2.
3.