33
Bluetooth
Remote voice control
Activate remote voice control
Press VOICE on the handset or
telephone base.
If you have connected two cell phones
to the telephone, the telephone shows
Activate remote voice control ...
1: Cell Phone X 2: Cell Phone Y
(Cell Phone X and Cell Phone Y
represent the device names of your
cell phones). Press CELL 1 or CELL 2.
The telephone then shows Activating remote
voice control....
If the activation fails, the telephone displays
Connection timeout. Please check cell status..
Press OK and try again.
When the telephone base or handset plays the
confirmation tone as forwarded by the cell phone’s voice
app, start speaking toward the telephone base or handset,
and then wait for feedback. Make reply to the voice app’s
feedback, if necessary.
You can press /SPEAKER on the handset to turn off
the speakerphone and listen to the feedback through
the handset earpiece.
To end the current remote voice control session, press
END on the telephone base or handset. The screen shows
Remote voice control ended. briefly. You can restart by
following Steps 1-3 mentioned above.
1.
•
2.
•
3.
•
4.
VOICE
Handset Telephone base
1
2
Activate remote
voice control ...
1: Cell Phone X
2: Cell Phone Y
CELL 1 CELL 2
1
2
Activating
remote voice
control...
END
1
2
Cell Phone X
00:00:01
END
To Next Page
Loading...
