AT&T TL96456 - Page 29

22
Bluetooth
Bluetooth setup
Press NEXT to turn on the telephone base discoverable
mode. The screen displays Set cell to search base:
AT&T DECT 6.0 PIN: 0000.
Promptly turn on the Bluetooth feature of your cell
phone and search for or add new devices. Once your cell
phone finds your AT&T phone (AT&T DECT 6.0), press
the appropriate key on your cell phone to continue the
pairing process.
Your cell phone may require a passcode. In this case,
the telephone base displays Check cellular. ENTER
PASSCODE. Enter the cell phone passcode (typically
0000) into the telephone base and press SET.
Enter the PIN of the telephone base (the default PIN
is 0000) into your cell phone to continue the pairing
process, if required. The telephone base displays
Adding Cell Phone Y (Cell Phone Y represents the
device name of your cell phone).
When a device is successfully connected, the telephone base
displays Cell Phone Y is added and connected to base. and
you hear a confirmation tone (Cell Phone Y represents the
device name of your cell phone). The corresponding status
icon ( 1 or 2) displays on the handset and telephone
base. The corresponding device light on the telephone base
(CELL 1 or CELL 2/HEADSET) turns on.
If you have trouble pairing your cell phone, it may not be compatible
with your TL96276/TL96456. Check the Bluetooth compatibility list at
www.telephones.att.com/bluetooth.
NOTES:
The pairing process may take up to one minute. If the pairing process fails, try again.
The steps for the pairing process may vary for different cell phones. If this happens, follow the
prompts on your cell phone and your TL96276/TL96456 to complete the pairing process.
Refer to the user’s manual of your cell phone on how to search for or add a new
Bluetooth device.
6.
7.
•
•
•
•
•
Adding
Cell Phone Y
Cell Phone Y
is added
and connected
to base.
Set cell to
search base:
AT&T DECT 6.0
PIN:0000