AT&T TL96456 - Page 93

86
Directory
Create and review entries
Using the telephone base:
Press MENU in idle mode.
Press CID or DIR to highlight Directory, then press SELECT .
When Home is highlighted, press OPTION.
Press SELECT to choose Add contact.
The screen displays ENTER NUMBER. Use the dialing keys to enter a
telephone number (up to 30 digits).
Press CID or DIR to move the cursor to the left or right.
Press BACKSP or X/DELETE to erase a digit.
Press and hold X/DELETE to erase all digits.
Press and hold REDIAL/PAUSE to insert a dialing pause (a p appears).
-OR-
When the screen displays ENTER NUMBER, press REDIAL/PAUSE to copy
a number from the redial list. Press CID or DIR , or press REDIAL/PAUSE
repeatedly to locate the desired number. Press INSERT to copy the
displayed number.
Press NEXT .
The screen displays SELECT LABEL. Press CID or DIR to highlight one of
the following label:
Home
Cell
Work
Other
Press NEXT to move on to the name.
The screen displays ENTER NAME. Use the dialing keys to enter a name (up
to 15 characters). Press a key repeatedly until the desired character shows
on the screen (see Character chart on page 87).
Press CID or DIR to move the cursor to the left or right.
Press BACKSP or X/DELETE to erase a character.
Press and hold X/DELETE to erase all characters.
Press 0 to add a space.
Press a>A to change the next letter to upper or lower case.
Press SAVE to store your new directory entry. There is a confirmation tone
and the screen shows Saved. To change the entry later, see pages 91-93.
1.
2.
3.
4.
5.
•
•
•
•
6.
7.
•
•
•
•
8.
9.
•
•
•
•
•
10.