Atel AXIS V810A - MAC Address Filtering

ATEL V810 Series
V810A Data User Manual
V6.1, January 3, 2023
18
Mac Filter
The default “MAC Filter” status is “OFF”. If the MAC Filter is on and devices are listed in
MAC Address Filter list, then all of the listed devices will be able to connect to your V810A.
For any given device, the interaction of the MAC Filter with the “Block” feature on the
Connected Devices screen is shown in the following table.
Included in Block List
Included in MAC Filter
List
Connection
No
Ye s
Allowed
No
No
Not allowed
Ye s
Ye s
Not allowed
Ye s
No
Not allowed
The “Block” (Blacklist) feature is always available. After blocked, the blocked devices will
disconnect from the V810A.
Because enabling the MAC Filter could potentially disconnect all devices, the user needs
to populate the “MAC Address Filter” list first while the MAC Filter is OFF. Otherwise, when