ATEL V810 Series
V810A and V810AD Data User Manual
V6.9, July 17, 2023
! IP Address:
Enter the IP address of your V810 online management portal (factory default: 192.168.0.1).
! Subnet Mask:
An address code that determines the size of the network. Generally, use 255.255.255.0
as the subnet mask.
! MAC Address:
It is written to the device at the time of manufacture.
! DHCP Lease Time:
The Lease Time is the amount of time a network user will be allowed connection to the
router with their current dynamic IP address. Enter the amount of time in minutes and the
user will be "leased" this dynamic IP address. After the time is up, the user will be assigned
a new dynamic IP address automatically.
! Start DHCP Address Range at:
Specify an IP address for the DHCP server to start with when assigning IP addresses. The
default start address is 192.168.0.2.
! Reserve IP Address:
Yo u c a n r e s e r v e a n I P ad d r e s s s o t h a t i t i s a l w a y s a s s i g n e d t o t h e s a m e c o n n e c t e d d ev i c e .
Every reserved IP address must be within the range of IP addresses used by DHCP.
To Next Page
Loading...
