ATEL V810 Series
V810A and V810AD Data User Manual
V6.9, July 17, 2023
! Wi-Fi Name (SSID):
To i de nti fy y ou r wire le ss n et wo rk , t he S SID ( Se rvi ce Set I den tif ier ) i s u se d. Yo u c a n s e t a
name with a max of 32 characters. Make sure that your SSID is unique if there are other
wireless networks operating in your area.
! Security:
Yo u c a n s e t w i r e l e s s s e c u r i t y a n d e n c r y p t i o n t o p r e v e n t t h e r o u t e r f r o m u n a u t h o r i z e d
access and monitoring. The default security is WPA Personal/PSK. You can also set
Security as “None”, “WPA Personal/PSK”, “WPA2 Personal/PSK(AES)”, or “WPA/WPA2
Mixed Mode”.
! 802.11 Mode
The default is 802.11a/ac (5GHz).
You can also set it as 802.11/b/g/n (2.4GHz).
Note: Some old Wi-Fi devices (TVs, gaming machines or other devices may only have
2.4G Wi-Fi. Changing the 802.11 Mode to 2.4G can help those devices find the Wi-Fi.
! Channel:
The default “Channel” is “Automatic”. Yo u c a n s e t i t f r o m c h a n n e l 1 t o c h a n n e l 1 1 .
! Wi-Fi Options:
Wi-Fi Options include Broadcast Wi-Fi name (SSID), Wi-Fi Privacy Separation, and Max Wi-
Fi Connections.
! Broadcast Wi-Fi Name (SSID):
The wireless device can search and connect to the SSID after turning on “Broadcast Wi-Fi
name (SSID)”. The wireless client must input the SSID manually to connect to the SSID after
turning off “Broadcast Wi-Fi name (SSID)”.
! Wi-Fi Privacy Separation:
If turned on, connected devices cannot communicate with each other.
! Maximum Wi-Fi Connections:
The default maximum number of Wi-Fi connections is 15. You can set it to any number
between 1 and 15.
LAN Settings
From the Direct Connect Portal, click Settings > LAN Settings to display the information
shown in the following figure.
To Next Page
Loading...
