ATEL V810 Series
V810A and V810AD Data User Manual
V6.9, July 17, 2023
Port Forwarding
! Applications
The default applications are “DNS”, “FTP”, “HTTP”, “NNTP”, “POP3”, “SMTP”, “SNMP”,
“Telnet” and “TFTP”. Port forwarding sends specific incoming traffic to a connected device.
The connected device is specified using an IP address.
! Custom Application
Click “Add a Custom Application” to define your own applications, and then turn them on
or off as needed. To define an application, you need to know the incoming ports used by
the application.
To Next Page
Loading...
